Latest Software
3-axis Brushless Gimbal Controller Tool
Flight controller V2 Firmware V4.0 (Auto speed down during RTH if less than 80m)
Gimbal Firmware New Version V1.0 (no need amend rate-limiting parameter)
Gimbal Firmware V2.41
free X  Flight Controller Tool V2(can choose the distance and height model)
Position: Home > free X FPV OSD
The FPV FreeX comes in an optional stunning aluminum box with an extendable pull handle for easy transport (Basic Version is gift box). On unpacking, all of the components come in their own protective compartment. These include a SkyRc E4 balance charger, USB cable for the firmware updates, propellers, various tools and a high powered 11.1v 5400Mah LiPo battery for a longer flight time even with the extra weight of the gimbal and camera.
The gimbal that comes pre-attached to the quadcopter is a 2 Axis full CNC brushless gimbal. It supports most small cameras including the SJ4000 cameras and the GoPro 3 upwards (please note that the camera is not included with the quadcopter). The camera is so very easy to attach – just loosen the 2 Allen key screws, slide the bar, fit the camera, tighten the screws, plug in and away you go!
Turning the quadcopter on, we are met with the flashing lights under the propeller arms, the usual 2 lights – indicating you are pointing north and that you are connected to the GPS. The gimbal comes to life and a quick click of the button on the gimbal and it is collaborated and is ready to shoot.
The gimbal that comes pre-attached to the quadcopter is a 2 Axis full CNC brushless gimbal. It supports most small cameras including the SJ cameras that we sell and the GoPro 3 upwards (please note that the camera is not included with the quadcopter). The camera is so very easy to attach – just loosen the 2 Allen key screws, slide the bar, fit the camera, tighten the screws, plug in and away you go.
Now to the next most important component - the awesome 2.4G 11 CH LCD FPV Transmitter w/ Video Recorder Monitor Mini HD DVR Wireless RC Receiver AV-IN and AV-OUT, built-in 5.8Ghz video receiver.
With the transmitter you are able to control the gimbal with the circular pad enabling you to take photos and videos from better angles. Other features include headless mode capabilities, being able to support a memory card of up to 32GB so that you can store the video footage and the ability to take videos and take photographs at a flick of a switch.
On the awesome OSD LCD display screen, it tells you an abundance of information including; flight time, distance flown, speed, current height, direction and longitude and latitude!!
  • Main Feathers:
  • 1. The motors will be shut off automatically if the FreeX doesn't take off after started the motors in 10 seconds;
  • 2. The FreeX will be forced into manual if there is no GPS signal during flight;
  • 3. The stick will be centered and FreeX will be switched to RTH (Return to Home) mode if the receiver lines are unplugged;
  • 4. There is a software can be installed in computer to check the parameters and know why the freeX flying was not right.
  • 5. Auto-return if battery less than 10.7v, and auto-landing if battery less than 10.2v during the flight. To keep the freeX safe and avoid crashes.
  • 6. Transmitter can be changed between mode 1 and 2 very easily.
  • 7. Auto Return to Home (RTH) function
  • 8.Intelligent Orientation Control
  • 9.GPS Position Hold: When the right Green LED is flashing (meaning you have all satellites locked) you can flip the flight mode switch to GPS (center position) and quadcopter will hold its position once all sticks are centered.
Specifications:
Width & Length: 280mm Motor: 2212-1050KV Brushless Motor
Height: 210mm ESC: 15AX Brushless ESC
Diagonal base: 396mm Receiver: Free X Receiver
Propeller Size: Standard 9 inch (Supports upto 10 inch Propeller) Battery: 11.1V 5400mAh Lithium Polymer
Flight Endurance: About 16 minutes with standard 11.1v 5400mAh Battery (including Camera and Gimbal) Fight Control Board: FreeX Onetouch 4 and UAV Grade FREE-X GPS module
Weight: 1320g (Include the battery, gimbal and Camera) Transmitter: freeX FPV transmitter with LCD Display
Parameters 2.4G Transmitter Specifications
Max Rudder Angle Speed: 150 °/s Transmission Frequency: 2.4GHz  Hopping 11CH Transmitter
Max Angle of Inclination: 45° Output Power: < 100mW
Max Lifting Speed: 3.5m/s Current Consumption: < 230mA (100mWh)
Max Flight Speed: ≤30km/h Output Pulse: 1000-2000mS (SUB TRIM is 1500)
    Control Distance (Outdoor/no stop) 1km
SkyRc E4Charger 5.8G Video Tx and Rx
Input Voltage: 100-240V Transmission Frequency: 5.8G
Output Current: 1A / /2A / 3A Output Power: 600mW
Compatibility: 7.4V / 11.1V / 14.8 Receiver: 32CH
    Control Distance (Outdoor/no stop): 2km
LCD Display Specifications (4.2 inch)
Resolution: 480 (H) × 640 (V) Viewing Angles (Up/Down/Left/Right): 50/65/60/60
Back Light: LED (5Pcs) Luminance: <300LUX
Dimension: 95 (W) mm × 55 (H) mm OperatingTemperature: -20℃~+70℃
Overall Dimension: 105.5 (W) mm × 65 (H) mm× 15(D) mm    
Mother Board Specifications
System Format: PAL/NTSC Voltage Input: DC 6V -12V
Size 84.5 (W) m m× 63.2 (H) m m× 7.2 (D) m m Video Input: 1.0Vp-p 75 ohm
  • Product includes:
  • 1x FreeX Quadcopter Ready to fly all setup, tweaked and tested
  • 1x freeX 2.4G 11 CH LCD FPV Transmitter w/ Video Recorder Monitor Mini HD DVR Wireless RC Receiver AV-IN and AV-OUT, built-in 5.8Ghz video receiver1x 5.8G Video Tx and Rx (with Antennas)
  • 1x OSD (Pre-installed)
  • 1x Onetouch 4 Flight Control Board (Pre-installed)
  • 1x FREE-X GPS module (Pre-installed)
  • 1x 2 Axis full CNC Brushless Gimbal (Supporting GoPro3 or upwards, SJ4000 and Xiaomi Camera ) (Pre-installed)
  • 1x 11.1V 5400mAh LiPo Battery
  • 1x SkyRc E4 Charger
  • 2x CW and CCW Blades / Propellers
  • 1x ID Card
  • 1x Propeller Tool
  • 4x Screws
  • 1x USB Cable / USB Dongle for Firmware upgrade
  • 1x English Manual
  • 1x Stickers
  • 1x Gift Box